Rittal High Performance Package

Details on High Performance Package
 

Rittal High Performance Package
 The compact class of data centres

High Performance Package       

  • Enclosure dimensions (WxHxD)
    800x2100x1000 mm or 800x2100x1200 mm
  • Glazed door at the front and rear
  • Seals ensure that the cooling remains in the enclosure and has no contact with the ambient air. This achieves energy-efficient cooling without influencing room temperature, and at the same time provides for quiet operation.

Liquid Cooling Package

  • Air/water heat exchanger with useful cooling output from 6.3 kW (1 module) to 16 kW (3 modules).
  • Each module comprises a fan section and an air/water heat exchanger.
  • The horizontal air routing guarantees even cooling of the installed components at all times.
  • Integrated sensors provide for permanent recording of the water and air temperatures, as well as the flow rate.
          

PSM socket strip UPS CMC-TC enclosure monitoring


For versions 1 to 6:
  • Plug & play socket modules, snap-mounted for fast replacement.
  • Shock-hazard protection; no electrician required for further expansion or replacement.
  • Socket modules in different versions (C13, C19, earth contact, active with current display and individually switched sockets) to suit customer requirements
  • Selective fusing matched to UPS output

For versions 1, 2, 4 and 5:
  • Maximal 32 A
  • Max. 36 sockets for C13 connectors
  • 1 earth-contact socket module with 4 sockets pre-installed
  • 1 IEC module with 6 x C13 sockets pre-installed
For versions 3 and 6:
  • Max. 96 A per supply
  • Max. 42 sockets for C13 connectors
  • 2 earth-contact socket modules with 4 sockets each pre-installed
  • 2 2 IEC modules with 6 x C13 sockets each pre-installed
  


For versions 1, 2, 4 and 5:
  • Single-phase uninterruptible power supply from 2 x 3.15 kW with a separate battery pack (autonomy time up to 8 minutes) to 2 x 4.5 kW with 2 battery packs (autonomy time up to 8 minutes)
  • Genuine double-conversion UPS, protection class VFI-SS-111, for a high level of availability
  • External bypass permits UPS replacement while the system is operational
  • Parallel hot-swap chassis for 3.15 kW and 4.5 kW modules allowing the integration of up to 3 UPS systems, either to enhance performance or to achieve n+1 redundancy
For versions 3 and 6:
  • 3-phase UPS with 16 kW, n+1 redundancy with 7 + 7 minutes autonomy time in a separate UPS enclosure (W x H x D 600 x 2100 x 1000 mm or 600 x 2100 x 1200 mm)
  • Distributed parallel architecture
  • Module can be replaced with the system operational
  • Genuine double-conversion UPS, protection class VFI-SS-111, for a high level of availability. The 3-phase UPS must always be connected and commissioned by a certified electrician or Rittal service partner.
 


For versions 1 to 6:
  • Door monitoring: Access sensors monitoring opening of the front and rear doors.
  • Permanent display of server air intake temperature and the current cooling output.
  • Monitoring of all operating states of the LCP.
  • Alarms can be sent via SNMP to the free Rittal RiWatchIT monitoring application or to any other existing management software.
  • Direct monitoring via an integrated Web server with user management.
  • Rittal CMC-TC places all important parameters at your fingertips.


back »


Further information
 
Customer and ordering information
  • Hotline Germany:
    +49 (0) 2772-505-1800
   
   

© 2012, Rittal
Imprint | Legals
 
Rittal - Umschalten auf Perfektion